Basalt Fiber Technologies & Products

Basalt reinforcing mesh

LIGRIL

LIGRIL

LIGRIL is an advanced material based on basalt fiber. It is successfully used in masonry, for reinforcement of large-sized bricks, aerated concrete, foamed blocks etc. It is also used in braced framing works to bond the facing and inner layers of the wall. A special alkali-resistant polymer impregnation ensures perfect protection of the grid from aggressive media and excellent adhesion to material.

Basalt reinforcing mesh with alkali resistant coating were developed to prevent cracks forming in different applications in construction industry as well as for reinforcement of mortars and non load bearing concrete. The higher tensile strength of this product compared to E-glass or steel increases impact resistance and prevents from cracks appearance. The basalt fiber mesh can meet the expectations and strict requirements of most demanding companies from construction market.

Material type

Composition MD/CMD tensile strength, kN/m Mesh size, mm MD/CMD elongation, %

Width, m (maximum)

LIGRIL (50/50)

Basalt roving, polymer impregnation 50/50 25×25 3

5,2

MASTER

MASTER

MASTER is a glass fiber mesh which is produced of two systems of glass rovings or complex yarns stitched with one another by a high tenacity yarn. The mesh is impregnated with special polymer preparation. The mesh is characterized by high elasticity and therefore is recommended for works on moveable surfaces. MASTER mesh effectively prevents shrinkage cracking and increases the stability of plastered layers. The glass fiber mesh is used in External Thermal Insulation Composite Systems (ETICS).

Material type

Surface density, g/m² Tensile strength, lengthwise/crosswise N/5cm Tensile strength (lengthwise/crosswise) after artificial aging test, N/5cm Mesh size, mm

Width, cm /Roll length, cm

MASTER 120

120 1300/1300 650/650 5×5 100/50

MASTER 140

140 1500/1500 750/750 5×5 100/50
MASTER 160 160 1800/1800 900/900 5×5

100/50

MASTER 165 PREMIUM 165 2000/2000 1000/1000 5×5

100/50

Basalt scrim

Basalt scrim

Basalt scrim is ideal for strengthening layer of plaster for interior and exterior walls, producing self-leveling floors, preventing the formation of cracks in plasterboard, insulation of vessels, tanks, oil and gas pipelines.

Parameter Values
Mesh widow size, mm 3,5 x 3,5
Surface density, g/m2 120 ± 25
width, mm 1000
Scrim material warp Basalt Roving
Coating warp For concrete and mortar
Scrim material weft Basalt Roving
Coating weft For concrete and mortar
Scrim type Leno fabric
Break load, kN/m warp >1,6, weft >1,09
Elongation at break, % warp 7, weft 6
Light and weather resistance (residual strength),% 90 (approximation)
Roll length 50, 100 meters

E-Shops


Contact

INCOTELOGY GmbH
Phone: +49 2234 9882370
Fax: +49 2234 9882372